SPM protection mats are designed to guarantee the highest possible level of safety on all occasions: the wide range of products is suitable for protecting various types of obstacles (poles, trees, walls, snowmaking, rocks, etc.). All SPM mattresses are coated with high-strength PVC (650gr/m²) and are available in standard yellow or, on request, orange, red, blue and green. SPM mats come in different types depending on the material they are made of.
FOAM RUBBER MATS
SPM foam mats have a 21 kg/mc high density elastic polyurethane foam core, with double heat sealing and are available in different shapes and sizes. They can be fixed by means of eyelets or Velcro on the two long sides or along the entire perimeter. Foam mats are available in the following standard sizes:
Rectangular standard line safety mats
370203 dim. 200x100x10cm
370204 dim. 200x150x10cm
370205 dim. 200x200x10cm
370233 dim. 200x100x15cm
370234 dim. 200x150x15cm
370235 dim. 200x200x15cm
370236 dim. 200x100x20cm
370237 dim. 200x200x20cm
Semicircular standard line safety mat
370093 dim. 200x35x6cm
370094 dim. 200x50x6cm
Circular standard line safety mat
370126-2 thickness 6 cm. Diam. external 15cm – Diam. internal 2cm – h. 200 cm
370126-4 thickness 6 cm. Diam. external 15cm – Diam. internal 2 cm – h. 400cm
370127 thickness 6 cm. Diam. external 17 cm – Diam. internal 5cm – h. 200cm
*Other dimensions on request
MATS FOR SNOWMARKING MACHINES AND PHOTOCELLS
Highly resistant line specially designed for snowmaking with double heat-sealing: these protectors are available with foam or TS10 inner (special padding that does not absorb water).
370154 Snowmaker covering mat trapezoidal shape – York
370252 “Book” shape standard mat – Borax
370193 “Book” shape covering TS10 mat
370190 “U” shape covering mat for water columns
370180 “L” shape mat
370175 Mat for photocell, triangular, with fixing band Dim. 60x50x40cm
TS10 SAFETY MATS
Composed of 4 cm thick polyethene sheets and cylinders glued together, and covered with high-strength PVC (650 g/m2), they are light (35% more than standard mattresses) and easy to transport. For the same thickness, TS10 mattresses absorb twice as much energy as foam rubber mattresses, thus further reducing the possibility of injury. The special polyethene padding absorbs very little water (0.1% of its own weight, foam rubber absorbs 98%): this reduces the risk of structural damage due to internal water freezing. Standard sizes available:
Rectangular TS10
370020 dim. 200×150 cm – thickness 12 cm
370042 dim. 200×200 cm – thickness 12 cm
Semicircular TS10
370103 diam. external 26 cm diam. internal 10 cm height 200 cm – thickness 8 cm
370104 diam. external 31 cm diam. internal 15cm height 200 cm – thickness 8 cm
370105 diam. external 34cm diam. internal 18 cm height 200 cm – thickness 8 cm
Circular TS10
370134 diam. external 26 cm diam. internal 10 cm height 200 cm – thickness 8 cm
370135 diam. external 31 cm diam. internal 15 cm height 200 cm – thickness 8 cm
370136 diam. external 34 cm diam. internal 18 cm height 200 cm – thickness 8 cm
* Other dimensions on request
AIR PADS
Air Pads high absorption mattresses are the best solution available to cushion the impact of an athlete in the event of a high-speed fall: the low-pressure air contained in the protection system guarantees protection and energy dissipation along its entire surface. The special internal design allows optimal shock absorption. Tested in the SPM laboratory and then crash-tested at the CSI in Bollate (MI) – the centre where F1 car tests are performed – they are perfect for protecting athletes in World Cup races. The Air Pads are easily anchored to the ground with special support poles and, thanks to the Velcro applied on the front, can be customised by adding PVC sheets or advertising mats.
The Air Pads can be positioned
– in the finish area, to secure the braking space in the finish area of races (used for World Cup, Olympics, World Championships);
– along the run, to protect pylons and TV structures on the racecourse, or customised according to specific needs and particular criticalities;
– along the run, to protect videomakers and photographers, thanks to their particular circular shape, they allow cameramen to have a wide field of vision and to work in total safety.
Available models:
370301 Air pads for finish area dim. 800×130 cm – thickness 130 cm
37030111 Air pads for finish area, dim. 600×130 cm – thickness 130 cm
370302 Air pads for the ski slope, dim. 500x200x130 cm
3703021 Air pads for the ski slope, dim. 500x180x100 cm
3703011 Air pads for the ski slope, dim. 500x130x130 cm
370303 Air pads for cameras, dim. 300x130x100 cm
Advertising system:
370207 Advertising banner mat, size 200×130 cm – thickness 6 cm
370207-L “L”-shaped advertising mat with Velcro for advertising banners. Designed for finish areas. Consisting of: front mat 158x200x3 cm; top mat 130x200x9 cm Colours: blue (standard), white
Inflation system:
370305 Inflate/maintenance complete system for 6 air pads (finish area)
370306 Motor blower for air pads
MULTIDENSITY MATS
Thanks to the combination of foam sheets connected together by transverse elements and the consequent formation of air chambers with a high shock energy dampening effect, Multidensity mattresses provide absorption equal to that of air mattresses but do not require maintenance and inflation systems. They are therefore very suitable for permanent protection of dangerous high-speed environments. Designed with special carrying handles and a lower sliding sheet, they are covered in PVC and are fixed by means of suitable posts or rear fixing systems. The Multidensity mattresses, all CRR-FIM approved, are available in the MOTO AND BIKE page.